View STL100NH3LL07_1107272.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

STL100NH3LL
N-channel 30V - 0.0032 - 25A - PowerFLATTM (6x5) STripFETTM III Power MOSFET
General features
Type STL100NH3LL VDSS 30V RDS(on) <0.0035 ID 25A (1)
1. The value is rated according Rthj-pcb
Improved die-to-footprint ratio Very low profile package (1mm max) Very low thermal resistance Conduction losses reduced Switching losses reduced
PowerFLATTM( 6x5 )
Description
This series utilizes the last advanced design rules of ST's proprietary STripFETTM technology. This process complete to unique metallization technique realised the most advanced low voltage Power MOSFET in PowerFLATTM(6x5). The Chipscaled PowerFLATTM package allows a significant board space saving, still boosting the performance.
Internal schematic diagram
Applications
Switching application
Order codes
Part number STL100NH3LL Marking L100NH3LL Package PowerFLATTM (6x5) Packaging Tape & reel
January 2007
Rev 9
1/12
www.st.com 12
Contents
STL100NH3LL
Contents
1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Electrical characteristics (curves) ............................ 6
3 4 5
Test circuit
................................................ 8
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2/12
STL100NH3LL
Electrical ratings
1
Electrical ratings
Table 1.
Symbol VDS VGS(1) VGS(2) ID(3) ID ID
(3) (5) (4)
Absolute maximum ratings
Parameter Drain-source voltage (VGS = 0) Gate-source voltage Gate-source voltage Drain current (continuous) at TC = 25C Drain current (continuous) at TC = 100C Drain current (continuous) at TC=100C Drain current (pulsed) Drain current (continuous) at TC = 25C Total dissipation at TC = 25C Total dissipation at TC = 25C Derating factor Value 30 16 18 100 71 15.6 100 25 80 4 0.03 -55 to 150 Unit V V V A A A A A W W W/C C
IDM
ID(5) PTOT PTOT
(3) (5)
TJ Tstg
Operating junction temperature Storage temperature
1. Continuous mode 2. Guaranteed for test time < 15ms 3. The value is rated according Rthj-c 4. Pulse width limited by safe operating area 5. The value is rated according Rthj-pcb
Table 2.
Symbol Rthj-case Rthj-pcb
(1)
Thermal resistance
Parameter Thermal resistance junction-case (Drain) (steady state) Thermal resistance junction-ambient Value 1.56 31.3 Unit C/W C/W
1. When mounted on FR-4 board of 1inch, 2oz Cu, t < 10sec
Table 3.
Symbol IAV EAS
Avalanche data
Parameter Not-repetitive avalanche current, (pulse width limited by Tj Max) Single pulse avalanche energy (starting Tj=25C, Id=Iav, Vdd=24V) Value 12.5 1.3 Unit A J
3/12
Electrical characteristics
STL100NH3LL
2
Electrical characteristics
(TCASE=25C unless otherwise specified) Table 4.
Symbol V(BR)DSS IDSS IGSS VGS(th) RDS(on)
On/off states
Parameter Drain-source breakdown voltage Zero gate voltage drain current (VGS = 0) Gate body leakage current (VDS = 0) Gate threshold voltage Static drain-source on resistance Test conditions ID = 250A, VGS= 0 VDS = Max rating, VDS = Max rating @125C VGS = 16V VDS= VGS, ID = 250A VGS= 10V, ID= 12.5A VGS= 4.5V, ID= 12.5A 1 0.0032 0.0035 0.004 0.005 Min. 30 1 10
100
Typ.
Max.
Unit V A A nA V
Table 5.
Symbol gfs (1) Ciss Coss Crss Qg Qgs Qgd RG
Dynamic
Parameter Forward transconductance Input capacitance Output capacitance Reverse transfer capacitance Total gate charge Gate-source charge Gate-drain charge Test conditions VDS =10V, ID = 12.5A Min. Typ. 30 4450 655 50 30 12.5 10 40 Max. Unit S pF pF pF nC nC nC
VDS =25V, f=1 MHz, VGS=0
VDD=15V, ID = 25A VGS =4.5V (see Figure 7) f=1 MHz Gate DC Bias = 0 Test signal level = 20mV open drain
Gate input resistance
1
2
3
1. Pulsed: pulse duration=300s, duty cycle 1.5%
4/12
STL100NH3LL
Electrical characteristics
Table 6.
Symbol td(on) tr td(off) tf
Switching times
Parameter Turn-on delay time Rise time Turn-off delay time Fall time Test conditions VDD=15V, ID= 12.5A, RG=4.7, VGS=10V (see Figure 13) Min. Typ. 18 50 75 8 Max. Unit ns ns ns ns
Table 7.
Symbol ISD ISDM(1) VSD(2) trr Qrr IRRM
Source drain diode
Parameter Source-drain current Source-drain current (pulsed) Forward on voltage Reverse recovery time Reverse recovery charge Reverse recovery current ISD=25A, VGS=0 ISD=25A, di/dt = 100A/s, VDD=25V, Tj=150C 32 34 2.1 Test conditions Min Typ. Max 25 100 1.3 Unit A A V ns nC A
1. Pulse width limited by safe operating area 2. Pulsed: pulse duration=300s, duty cycle 1.5%
5/12
Electrical characteristics
STL100NH3LL
2.1
Figure 1.
Electrical characteristics (curves)
Safe operating area Figure 2. Thermal impedance
Figure 3.
Output characterisics
Figure 4.
Transfer characteristics
Figure 5.
Transconductance
Figure 6.
Static drain-source on resistance
6/12
STL100NH3LL Figure 7. Gate charge vs gate-source voltage Figure 8.
Electrical characteristics Capacitance variations
Figure 9.
Normalized gate threshold voltage vs temperature
Figure 10. Normalized on resistance vs temperature
Figure 11. Source-drain diode forward characteristics
Figure 12. Normalized BVDSS vs temperature
7/12
Test circuit
STL100NH3LL
3
Test circuit
Figure 14. Gate charge test circuit
Figure 13. Switching times test circuit for resistive load
Figure 15. Test circuit for inductive load Figure 16. Unclamped inductive load test switching and diode recovery times circuit
Figure 17. Unclamped inductive waveform
Figure 18. Switching time waveform
8/12
STL100NH3LL
Package mechanical data
4
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com
9/12
Package mechanical data
STL100NH3LL
PowerFLATTM (6x5) MECHANICAL DATA
mm. DIM. MIN. A A1 A3 b D D1 D2 E E1 E2 E4 e L 0.70 3.43 2.58 4.15 0.35 0.80 TYP 0.83 0.02 0.20 0.40 5.00 4.75 4.20 6.00 5.75 3.48 2.63 1.27 0.80 0.90 0.027 3.53 2.68 0.135 4.25 0.163 0.47 0.013 MAX. 0.93 0.05 MIN. 0.031 TYP. 0.032 0.0007 0.007 0.015 0.196 0.187 0.165 0.236 0.226 0.137 0.103 0.050 0.031 0.035 0.139 0.105 0.167 0.018 MAX. 0.036 0.0019 inch
10/12
STL100NH3LL
Revision history
5
Revision history
Table 8.
Date 18-Apr-2005 20-Jun-2005 22-Jun-2005 10-Oct-2005 09-Jan-2006 08-Mar-2006 29-Jun-2006 04-Sep-2006 04-Jan-2007
Revision history
Revision 1 2 3 4 5 6 7 8 9 First Release Updated mechanical data New Rg value on Table 6 Inserted ecopack indication New footprint New template Modified curves, see Figure 1 and Figure 2 The document has been reformatted, no content change New updated on Table 1 Changes
11/12
STL100NH3LL
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
12/12

▲Up To Search▲

Price & Availability of STL100NH3LL07

	To Download STL100NH3LL07 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .